Bathroom towel cabinet: how to make

Bathroom towel cabinetBuilding a bathroom towel cabinet supplies extra storage space for bath towels and other products. Numerous bathrooms, specifically those in older houses, do not supply enough storage space. Layout a tailor-made bathroom towel cabinet to match your bathroom’s interior and construct it in a couple of easy actions.

Instructions Cut the Wood

Usage the saw and chopped the first sheet of plywood in to 2 pieces that are 18 inches wide by 25 inches long for the best and base of the cupboard. Cut 2 pieces that are 18 inches by 36 inches for the sides.

Cut from the second slab of plyboard one piece that is 23.5 inches by 36 inches for the back of the bathroom towel cabinet.

Cut one piece that is 25 inches by 36 inches for the door of the closet. Cut 2 pieces that are 17 inches by 23 inches for the shelves.

Cut the remaining plyboard into eight squares that are 3 inches on each side for the cabinet’s feet.

Sand and paint the pieces and allow them to dry.

Build the bathroom towel cabinet

Stand the back piece on its long edge and spot a side piece on leading at an ideal angle, lining up the long edges. Screw the pieces with each other with four uniformly spaced 1-1/2-inch screws, making use of the drill to produce pilot openings for the screws if essential. Affix the other side piece in the exact same way.

Stand the incomplete frame and connect the leading piece on leading. Use one screw every 12 inches. If needed, pierce aviator gaps.

Connect two of the 3-inch squares at a right angle, utilizing 2 screws. If needed, pierce pilot gaps. Repeat for the continuing to be squares to make the cupboard feet.

Connect the feet to the undersurface of the bottom piece so the corners of the feet line up with the edges of the piece. Usage 3 screws per foot. If needed, drill aviator holes.

Flip the frame over and affix the bottom piece. Usage one screw every 12 inches, drilling aviator gaps if essential.

Position the racks at the wanted locations and screw them into spot. Drive 2 screws through the beyond the structure on each side and 2 for the back.

Attach the joints to the lengthy side of the door, making use of the 1/2-inch timber screws. Placement the joints 4 inches from scratch and base of the door.

Affix the various other half of the joints to the inside of the cupboard framework. Screw the handle to the beyond the door.

Stand the back piece on bathroom towel cabinet lengthy edge and spot a side piece on best at an appropriate angle, lining up the long sides. Screw the pieces with each other with four uniformly spaced 1-1/2-inch screws, using the drill to produce aviator holes for the screws if required. Stand up the unfinished structure and connect the leading piece on top. Usage one screw every 12 inches. Affix the feet to the undersurface of the bottom piece so the edges of the feet line up with the corners of the piece.


Next: Bath towels made in USA